Olá Guilherme, boa noite!
Infeliz ou felizmente acredito q seu problema ainda seja configuração!
Sendo assim, segue abaixo o texto q retirei do manual q explica exatamente esta parte.
Obs: o Tilt já vem pre configurado de fabrica pois para q este atue só é preciso saber os fim de curso do servo e para isso os valores de pulso são bem conhecidos para o software, porém o mesmo não acontece com o pan, pois neste caso vc pode usar diferentes servos com anglos diferentes de atuação!
Segue texto:
Pan Angle Calibration Steps with PC
Here are the steps for calibrating pan angles with the PC:
1) Select the pan angle you would like to calibrate, using the ?Choose Pan Angle to Calibrate? menu item. Note that once a particular angle is calibrated, the calibration status say ?Calibrated,? indicating that it?s already calibrated. But, you can recalibrate it and the new calibration overwrites the old one.
TM
tracker, we recommend the simplest calibration initially, which is described in example ?A? in the ?Pan Calibration Examples (both calibration methods)? section above. Later, when you become more familiar with the calibration steps,
For most trackers, including the ReadyMadeRC
you may want to calibrate additional angles for more precise pointing.
Note that the angle you select is the compass location you should pan to, rather than the amount of rotation. Here is information on panning to each of the possible angles:
? 0 deg/N ? when this angle is selected, pan until the tracker is pointing to 0 degrees (North).
? 45 (CW) – when this angle is selected, pan clockwise until the tracker is pointing to the 45 degree compass position (Northeast).
? 90/E(CW) ? when this angle is selected, pan clockwise until the tracker is pointing to the 90 degree compass position (East).
? 180 (CW) ? when this angle is selected, pan clockwise until the tracker is pointed to the 180 degree compass position (South).
? Max CW ? when this angle is selected, pan clockwise to the maximum point your tracker can safely pan
? 315(CCW) ? when this angle is selected, pan counterclockwise until the tracker points to the 315 degree compass position (Northwest)
? 270(CCW) – when this angle is selected, pan the tracker counterclockwise until it is pointing to the 270 degree compass position (West)
? 180(CCW) ? when this angle is selected, pan counterclockwise until the tracker is pointing to the 180 degree compass position (South)
? Max CCW – when this angle is selected, pan counterclockwise to the maximum point your tracker can safely pan
2) Pan the antenna to the selected angle, using the ?Pan X% Less and/or Pan X% More? buttons. WARNING: make sure you don?t exceed your pan servo?s maximum rotation, or the servo could be damaged!
3) Click the ?Click here when you have finished panning to the selected angle? button to indicate you have panned the tracker to the correct angle. Steps 1 through 3 are now repeated for each pan angle you wish to calibrate.
4) After calibrating the desired pan angles, click the ?Finalize All Pan Angles!? button, which completes the pan angle calibration process. Note that if an error appears indicating that you have not calculated enough pan angles, please see the ?Pan Calibration Examples (both calibration methods)? section above which should help you to determine which pan angles need to be calibrated for your tracker.
Qq duvida estamos aew!
Abrs
